










K&F 4.5″ Suction Mount with Magic Arm, Phone & Action Cam Mount
When a shoot demands rock-solid camera placement on glass, metal or any smooth vertical surface, rigging options narrow fast. Traditional clamps won't grip curved windscreens. Adhesive mounts leave residue. Magnetic systems only work on ferrous panels. This suction-cup mounting system solves the problem with industrial-grade vacuum hold, multi-axis articulation and enough threaded attachment points to handle everything from a smartphone to a mirrorless rig with lighting.
Vacuum-activated grip engineered for load
The 115mm diameter suction foot generates enough negative pressure to anchor 60kg horizontally or 40kg vertically when properly seated. That capacity covers the weight of a cinema camera package, though the practical ceiling for this system sits closer to a mirrorless body with a prime lens and compact LED panel. Pump the plunger until resistance peaks, then watch the red warning band around the perimeter, if it becomes visible, vacuum pressure has dropped and you need to re-pump or reposition. Temperature swings during a day's shoot will cause the air inside the cup to expand or contract, so checking and topping up the vacuum every hour is standard practice. The dust cover plate keeps the rubber foot clean between uses, preserving the seal's integrity over hundreds of applications.
Cheeseboard aluminium block with ARRI anti-rotation pins
Bolted to the suction base is a machined aluminium mounting block drilled with a grid of 1/4" and 3/8" threaded holes, plus ARRI-standard locating pin sockets. The central 3/8" hole ships with a 1/4" reducer already installed, so you can thread on a ball head, magic arm or quick-release plate without hunting for an adapter. The pin holes prevent rotational slip when you mount accessories that have matching locating pins, a detail borrowed from professional grip hardware that matters when you're rigging a camera over a car bonnet at motorway speed. If your accessory doesn't have locating pins, the threaded holes alone still provide a secure anchor; the pins simply add a mechanical lock for equipment that supports them.
Dual ball-head magic arm for fast, repeatable angles
The included articulating arm uses two independent ball joints connected by a rigid aluminium tube. Loosen the centre knob and both balls unlock simultaneously, letting you swing the arm through a full sphere of motion. Lock it down and the position holds under loads up to 3kg, enough for a mirrorless camera body with a pancake or standard zoom, or a larger smartphone gimbal rig. The arm's quick-release design means you can break down a setup, reposition the suction mount, then snap the arm back on without losing your framing. That speed matters when you're working alone in a vehicle interior and need to shift from a dashboard angle to a rear-window shot between takes.
Universal device compatibility across formats
Two additional mounts ship in the kit: a spring-loaded phone clamp that grips devices up to 90mm wide, and a GoPro-style three-prong adapter for action cameras. Thread either onto the magic arm's 1/4" stud, or bolt them directly to the aluminium block if you want a lower-profile mount. This flexibility turns one suction base into a multi-format platform, rig your mirrorless on the magic arm for a tracking shot, then swap in your phone for a behind-the-scenes story, all without moving the suction cup. The phone mount's rubber-padded jaws won't scratch screens, and the action-camera adapter's three-prong design is compatible with the entire GoPro accessory ecosystem, including third-party clones.
Surface preparation determines hold strength
Vacuum suction only works as well as the surface it's pressed against. Clean the mounting area with isopropyl alcohol or glass cleaner to remove oils, dust and road film, even a fingerprint can compromise the seal. The surface must be smooth and non-porous: windscreens, painted metal panels, laminated furniture and large mirrors all work. Textured dashboards, vinyl wraps and matte paint finishes won't hold. Once the foot is positioned, pump the plunger until you feel strong resistance, then give it two extra strokes. The red warning band should be completely hidden beneath the suction cup's rim. If any red shows, the vacuum isn't full, keep pumping or reposition and start again.
Mandatory safety tether for overhead and moving applications
The suction mount includes a tether loop specifically for attaching a backup safety line. Any time the camera is mounted above head height, over a person, or on a moving vehicle, that tether must be used. Run a cord from the loop to a fixed anchor point independent of the suction cup, a seat rail, door hinge or roof rack. If the vacuum fails, the tether catches the gear before it falls. This is non-negotiable for vehicle work: even a 60kg-rated suction cup can lose grip if the car hits a pothole at speed or if cabin temperature spikes in direct sun. The tether isn't a backup, it's primary safety rigging.
Aluminium construction for repeated field use
The mounting block, magic arm and suction base housing are all CNC-machined aluminium alloy, chosen for its combination of low weight and high fatigue resistance. The material won't corrode in humid environments, and the anodised finish resists scratches from being tossed into a kit bag between shoots. Replacement rubber washers for the magic arm's ball joints are included in the kit, along with the hex keys needed to service the mount's fasteners. These small inclusions extend the system's working life well beyond what you'd get from a moulded-plastic equivalent, when a washer wears out after a year of heavy use, you swap it instead of replacing the entire arm.
Quick-release tabs for clean removal
When the shoot wraps, pinch the two release tabs on opposite sides of the suction cup and pull. The tabs break the vacuum seal instantly, letting you lift the mount away without leaving marks or requiring a pry tool. This clean release is critical when working on client vehicles or rented locations where surface damage isn't acceptable. The mechanism also prevents the suction cup from tearing if you try to yank it off while the vacuum is still engaged, a common failure mode for cheaper mounts that rely on brute force removal.
Vehicle interiors and confined-space rigging
This system excels in scenarios where tripod legs won't fit and traditional clamps have nothing to grip. Mount the suction cup to a car's rear window for an over-the-shoulder driver angle, or stick it to the windscreen for a dashboard-cam perspective. The magic arm's reach and articulation let you route around headrests, mirrors and gear levers to frame the shot you need. Outside vehicles, the mount works equally well on large windows for time-lapse setups, or on metal cabinets and appliances for product demo angles. Anywhere you have a clean, flat surface and need a camera in a spot a tripod can't reach, this kit provides a solution.
The K&F Concept 4.5" Suction Camera Mount with Double Ball Head Magic Arm, KF31.100V1, delivers the holding power, adjustability and device compatibility to handle multi-format shoots in tight spaces. It's built for working professionals who need gear that rigs fast, holds under load and breaks down without fuss.

